GEMTECH Differential Pressure Gauge Dealers Near National Heart Institute

June 5, 2025June 9, 2025Envirotech

**www.envirotechindustrialproduct.info**

GEMTECH Differential Pressure Gauge Dealers Near National Heart Institute

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materi

SPECIFICATION

Ambient Temperature – -21 ~140 -6 ~60

Rated Pressure -20 inHg~30 inHg (-68~103KPa)

Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)

Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back

Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

Accuracy – ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)

Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

OEM/ODM
There Is No Need To Fill Liquid To Gauge.
The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
Exact And Stable Fixed Position Of Needle.
The Gauge Has Great Antiknock Characteristics.
There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

Filter Monitoring
Air Velocity With Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct,Room or Building Pressures
Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By Model Number Popularity

FILTER BY
Range – MM Of Water

Model	Description
G2000-100MM	Differential Pressure Gauge,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MM	Differential Pressure Gauge,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MM	Differential Pressure Gauge,Range 0-150 MM W.C.
G2000-15MM	Differential Pressure Gauge,Range 0-15 MM W.C.
G2000-200MM	Differential Pressure Gauge,Range 0-200 MM W.C.
G2000-250MM	Differential Pressure Gauge,Range 0-250 MM W.C.
G2000-25MM	Differential Pressure Gauge,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MM	Differential Pressure Gauge,Range 0-300 MM W.C.
G2000-50MM	Differential Pressure Gauge,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MM	Differential Pressure Gauge,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MM	Differential Pressure Gauge,Range 0-80 MM W.C., Minor Divisions 2.0.

Additional Information:

Item Code: GEMTECH Differential Pressure Gauge Dealers Near National Heart Institute
www.envirotechindustrialproductsdelhi.com
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info

AHU PRE FILTER In Amalapuram Andhra Pradesh

August 19, 2022August 20, 2022Envirotech

AHU PRE FILTER In Amalapuram Andhra Pradesh

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU-PRE-FILTER-In-Amalapuram-Andhra-Pradesh
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.co.in
www.envirotechindustrialproduct.in

AHU PRE Filter In Lanja Maharashtra

August 19, 2022August 20, 2022Envirotech

AHU PRE Filter In Lanja Maharashtra

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU-Pre-Filter-In-Pulwama-Jammu-and-Kashmir
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.co.in
www.envirotechindustrialproduct.in

AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand

August 18, 2022August 20, 2022Envirotech

AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com

AHU PRE FILTER In Cuddapah Andhra Pradesh

August 16, 2022August 19, 2022Envirotech

AHU PRE FILTER In Cuddapah Andhra Pradesh

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU PRE FILTER In Cuddapah Andhra Pradesh
www.envirotechdelhi.net
www.envirotechindia.info
www.envirotechdelhi.info

AHU PRE FILTER In Bazpur Uttarakhand

August 16, 2022August 19, 2022Envirotech

AHU PRE FILTER In Bazpur Uttarakhand

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU PRE FILTER In Bazpur Uttarakhand
www.envirotechdelhi.com
www.envirotechindia.co.in
www.envirotechdelhi.in

AHU PRE FILTER In Rasipuram Tamil Nadu

August 16, 2022August 19, 2022Envirotech

AHU PRE FILTER In Rasipuram Tamil Nadu

Fine Filters Are Available in The Range of 1 to 5 Micron:

Low Initial Pressure Drop.
Light In Weight And Easy To Handle.
High Cost / Performance Ratio.
High Dust Holding Capacity.
Cleanable / Washable.

Applications:

General Filtration For Air-Conditioning And Air Handling Units.
General Air Filtration And Pre-Filtration.
Spray Booths And Pre-Filtration.

Specifications:

Type: Flange or Box
Frame: Galvanized Steel, Aluminum Anodized,SS304
Separators: Aluminum
Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No	Sizes In Inchs	Flow ( CFM )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24

Additional Information:

Item Code: AHU PRE FILTER In Rasipuram Tamil Nadu
www.envirotechindustrialproduct.info
www.envirotechindustrialproducts.info
www.envirotechdelhi.com

Sensocon USA 211-D040I-3 Differential Pressure Transmitter

August 14, 2022August 16, 2022Envirotech

Sensocon USA 211-D040I-3 Differential Pressure
TransmitterThe Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.Specifications

Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

Stability:

+/- 0.25% FS/Year

Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

Loop Resistance:

250 Ω @ 24 VDC

Power Supply:

12-30 VDC

Housing Material:

ABS Plastic

Electrical Connection:

Screw Terminals

Process Connection:

Push On Connection For 3/16″ I.D. Tubing

Agency Approvals:

Model Number

Model	Pressure Range	Accuracy
211-D001I-1	0-1″	1%
211-D002I-1	0-2″	1%
211-D004I-1	0-4″	1%
211-D006I-3	0-6″	0.25%
211-D010I-3	0-10″	0.25%
211-D020I-3	0-20″	0.25%
211-D040I-3	0-40″	0.25%
211-D005P-3	0-5 PSI	0.25%
211-D010P-3	0-10 PSI	0.25%
211-D015P-3	0-15 PSI	0.25%
211-D250A-1	0-250 Pa	1%
211-D500A-1	0-500 Pa	1%
211-D001K-1	0-1 kPa	1%
211-D002K-3	0-2 kPa	0.25%
211-D003K-3	0-3 kPa	0.25%
211-D005K-3	0-5 kPa	0.25%
211-D010K-3	0-10 kPa	0.25%
211-D025K-3	0-25 kPa	0.25%
211-D050K-3	0-50 kPa	0.25%
211-D100K-3	0-100 kPa	0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

Item Code: Sensocon-USA-211-D040I-3-Differential-Pressure-Transmitter
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
www.envirotechindustrialproductsdelhi.com

Sensocon USA 211-D500A-1 Differential Pressure Transmitter

August 11, 2022August 16, 2022Envirotech

Sensocon USA SERIES 211-D500A-1 Differential Pressure Transmitter

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

Stability:

+/- 0.25% FS/Year

Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

Loop Resistance:

250 Ω @ 24 VDC

Power Supply:

12-30 VDC

Housing Material:

ABS Plastic

Electrical Connection:

Screw Terminals

Process Connection:

Push On Connection For 3/16″ I.D. Tubing

Agency Approvals:

Model Number

Model	Pressure Range	Accuracy
211-D001I-1	0-1″	1%
211-D002I-1	0-2″	1%
211-D004I-1	0-4″	1%
211-D006I-3	0-6″	0.25%
211-D010I-3	0-10″	0.25%
211-D020I-3	0-20″	0.25%
211-D040I-3	0-40″	0.25%
211-D005P-3	0-5 PSI	0.25%
211-D010P-3	0-10 PSI	0.25%
211-D015P-3	0-15 PSI	0.25%
211-D250A-1	0-250 Pa	1%
211-D500A-1	0-500 Pa	1%
211-D001K-1	0-1 kPa	1%
211-D002K-3	0-2 kPa	0.25%
211-D003K-3	0-3 kPa	0.25%
211-D005K-3	0-5 kPa	0.25%
211-D010K-3	0-10 kPa	0.25%
211-D025K-3	0-25 kPa	0.25%
211-D050K-3	0-50 kPa	0.25%
211-D100K-3	0-100 kPa	0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

Item Code: Sensocon-USA-211-D500A-1
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.co.in
www.envirotechindustrialproduct.in

Sensocon USA SERIES 211-D001K-1 Differential Pressure Transmitter

August 11, 2022August 16, 2022Envirotech

Specifications

Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

Stability:

+/- 0.25% FS/Year

Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

Loop Resistance:

250 Ω @ 24 VDC

Power Supply:

12-30 VDC

Housing Material:

ABS Plastic

Electrical Connection:

Screw Terminals

Process Connection:

Push On Connection For 3/16″ I.D. Tubing

Agency Approvals:

Model Number

Model	Pressure Range	Accuracy
211-D001I-1	0-1″	1%
211-D002I-1	0-2″	1%
211-D004I-1	0-4″	1%
211-D006I-3	0-6″	0.25%
211-D010I-3	0-10″	0.25%
211-D020I-3	0-20″	0.25%
211-D040I-3	0-40″	0.25%
211-D005P-3	0-5 PSI	0.25%
211-D010P-3	0-10 PSI	0.25%
211-D015P-3	0-15 PSI	0.25%
211-D250A-1	0-250 Pa	1%
211-D500A-1	0-500 Pa	1%
211-D001K-1	0-1 kPa	1%
211-D002K-3	0-2 kPa	0.25%
211-D003K-3	0-3 kPa	0.25%
211-D005K-3	0-5 kPa	0.25%
211-D010K-3	0-10 kPa	0.25%
211-D025K-3	0-25 kPa	0.25%
211-D050K-3	0-50 kPa	0.25%
211-D100K-3	0-100 kPa	0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

Item Code: Sensocon-USA-211-D001K-1-Differential-Pressure-Transmitter
www.envirotechindia.co.in
www.envirotechdelhi.in
www.envirotechdelhi.net