Aerosense Mack Magnehelic Gauge Wholesale INDIA

Product Details:

Aerosense Series PS Differential Pressure Switch

Series PS Differential Pressure Switch With dual scale field adjustable Set Point Knob

The Series PS Differential Pressure Switch is designed for pressure, vacuum and differential pressure. The dual scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The PS is available in settings from 20 Pa to 4500 Pa. The compact size, adjustment knob and low cost make the PS the perfect choice for HVAC applications.

Product Applications:

Fan, Blower and filter monitoring
Pressure and Flow monitoring
Valve and damper monitoring

Service: Air & non aggressive gases
Material: ABS
Electrical Connection: 3 Screw terminal
Cable Entry: M16
Pressure Connection: Male 0 5 MM
Weight: 150 gms
Operation Temperature: -20 to 60° C
Storage Temperature: -40 to 85° C
Maximum Pressure: 50 kPA
IP Protection: IP54

2 Fixing Screws
2 Plastic duct connectors
2 m tube 0 4/7 mm
Metallic duct connectors

• INTRODUCTIONS
• TECHNICAL DATA
• OPTIONAL ACCESSORIES
• MODEL SUMMARY

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechdelhi.co.in

Aerosense Series DPT-R8-3W Differential Pressure Transmitter

Series DPT-R8-3W Differential Pressure Transmitter Monitors Pressure
The Series DPT-R8-3W Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure. The compact package is loaded with features such as 8 selectable ranges, 2 selectable outputs, optional display and optional Auto-Zero feature which electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes). The Auto-Zero adjustment takes 4 seconds.
The AZ calibration eliminates all output signal drift due to thermal, electronic or mechanical effects. Optional display and Auto-Zero feature available.
Product Applications:
Building pressure monitoring
Duct pressure monitoring
Filter condition monitoring
Note! Supply voltage must be connected one hour before the 0-point adjustment is carried out.
Loose both tubes from the pressure inlets + and –
Push zero button until the red led turns ON.
Wait until LED turns off and then install tubes again to the pressure inlets.
It is recommended to adjust the zero point every 12 months during normal operation.
If the transmitter is equipped with automatic zero element the manual push button adjustment is not required.
AZ-calibration is a function in the form of an automatic zeroing circuit built into the PCB. The AZ-calibration electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes). The AZ-calibration eliminates all output signal drift due to thermal, electronic or mechanical effects, as well as the need for technicians to remove high and low pressure tubes when performing initial or periodic transmitter zero point calibration.

The AZ adjustment takes 4 seconds. To avoid conflict with the BAS system, the output and display values will freeze to the latest measured value, after which the device returns to its normal measuring mode. Transmitters equipped with the AZ-calibration are virtually maintenance free.
Service: Air and non-aggressive gases Measuring element: Piezoresistive Accuracy: ±0.8%, or (±1% <250 Pa)
Measuring unit: Selectable by jumper (Pa, kPa, mbar, inchWC, mmWC, psi)
Response Time: 0.8 / 4 s selectable by jumper Max pressure: 400 kPa
Electrical interface :
Supply voltage: 24 VAC or VDC ± 10 %
Power co nsumption: <1.0 W (<1.5W with lout 20mA)
Output signal :
0…10 VDC, Load R minimum 1 kQor
4…20 mA, maximum load 500Q
Materials:
Housing: ABS
Cover: PC
Pressure connections: ABS
Connections:
Electrical co nnections: 4 screw terminals, max 1.5 mm2
Cable entry: M16
Pressure connections: Male 5,0 mm and 6,3 mm Weight: 150 g
Dimensions: 90,0 x 71,5 x 36,0 mm
General ambient condition:
Temperature range:
Operation -10…+50°C (-5…+50°C for -AZ model)
Storage: -20…+70°C
Ambient humidity: 0 to 95% RH
Safety:
Protection standard: IP54
Conformance: Meets the requirements for CE marking:
EMC directive 2004/108/EY
Rohs Directive 2002/95/EY
Optional Accessories:
Plastic Pressure Tips
2m Tubes
 

Additional Information:

• Minimum Order Quantity: 1 Number
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechindustrialproducts.com

Product Details:

Aerosense Series ADPI/CDPI Differential Pressure Indicator/ Transmitter

Series ADPI/CDPI Differential Pressure Indicator/ Transmitter

Series CDPI/ADPI Differential Pressure Indicator/ Transmitter with circular standard Differential Pressure Gage cut out & 0.5% accuracy of F.S

Product Applications:

Pharma Cleanrooms
HVAC
Environmental
Pharma Machinery
Across filters
Hospital violation rooms
Operation theatres & laboratories
Precision of measurement in HVAC duct pressure application makes the instrument suitable for optimization of energy & thereby its conversation is ventilation systems.

Built in High and Low Buzzer Alarm for process set parameter.
Violation with Acknowledgment key.
Integrated 4 Digit Red LED 7 segment display of standard 0.5″ size.
Analog output & RS-485 communication lead to easy integration with variable frequency drives & SCADA/BMS systems, AHUs.

Pressure Measuring Range:

-10.0 to +10.0 mm.W.C./-25.0 to +25.0 mm. W.C.
-50.0 to -50.0 mm.W.C./0.0 to+100.0 mm. W.C.
-100 to +103 Pascal’-250 to +250 Pascal
Alarms:

Built In High & Low Buzzer Alarm for Process Set Parameter
Violation with Acknowledgment Key
Size:

ADPI- Instrument Encbsure is in 75x70x40 mm. (WxHxD)

CDPI-Standard 114.50

Maximum Over Pressure: 2 Times the rated pressure

Unit Selection: mm.W.CiPascal selectable from front key

Display: Integrated 4 Digit Red LED 7 Segment Display 0.5″ High

Sensor: Integrated High Speed Differential Pressure Sensor

Resolution: 1 P3scal/0.1 mm w.c

Power 24 Volts D.C. Typical

Output (Optional): 4-20 mAIsolated.’ 0-10VDC

Medium: Air or Gases (Non Corrosive)

Accuracy: +1-0.5% of Full Sc3le.

Connection: 2 Nos. Hose Nipples of 4mm. Stainless Steel 3*. the Beck

Communication Optional: Isolated RS485 Modbus Protocol

MOC: ADPI-W.S. Powder Coated Body with Stairless Steel Front Flush Plate for Modular Wall Fitment in Clean Rooms : CDPI-Aluminum Powder-Coated Body with Flush Bezel. Splash-Proof Polycarbonate Front Cladding

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechindustrialproduct.co.in

Product Details:

Aerosense Series ASG Differential Pressure Gage

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechindustrialproducts.co.in

the series of pressure switches Aerosense Differential Pressure Switch is the most updated one.Generally, they are applied in the fan, blower and filter monitoring as well as to measure the pressure and flow of gases & liquids in different industries. Enabled with the effective mechanism these switches have high-tech features & specifications such as selectable switching point adjustment and measurement unit facility in PA.Several additional accessories are also provided for the ease of users that primarily include metallic duct connectors,plastic dust connectors, and fixing screws.

Features:

• Pressure and flow monitoring
• Two fixing screws
• Metallic duct connectors

Specifications:

• Medium: Air, Non-Combustible and Non-Aggressive Gasses
• Electrical Rating: 1.5A (0.4A) / 250V
• Usage: Control Switch

 

Additional Information:

• Minimum Order Quantity: 12 Number

Product Details:

Aerosense Differential Pressure Indicator

Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the precised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner.

Features:

• Integrated red LED seven segment display
• Differential pressure sensor
• Stainless steel at the back

Specifications:

• Case Material: 304 Stainless Steel
• Measure Range: 0-160MPa -0.1-0-2.4MPa
• Size: 100mm/4″(From 40mm~250mm)

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 9650264867
• Delivery Time: 9871034100
• Packaging Details: www.envirotechdelhi.co.in

Product Details:

Aerosense DP Gauge

Aerosense DP Gauge are extensively used for measuring the differential pressure in pharma clean rooms, HVAC applications, pharmaceutical machinery,Pass Box,etc. Specifications: Indicating Pressure Reference: Gp,Cp,Ap or Dp Selectable Function: Electric Signal-controlled Application: Industrial Display: Digital

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI
• Production Capacity: www.envirotechindustrialproducts.in
• Delivery Time: www.envirotechindustrialproduct.com
• Packaging Details: www.envirotechindustrialproducts.com

Aerosense Differential Pressure cum Flow Transmitter is technically engineered type of flow transmitter that is especially used in HVAC/R industry to control the flow, velocity and static of air pressure. Apart from measuring the flow of air control, this type of transmitter is used in the other major applications such as VAV domain and air flow monitoring across centrifugal fans & blowers. It supports low power consumption as well as enabled with the zero point calibration system.

Features:

• VAV applications
• Minimum resistance
• Piezo resistive

Specifications:

• Pressure range: 0.001MPa???35MPa
• Medium: Liquid,Gas and Steam
• Temperture: -20-120c

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Aerosense Differential Pressure Gauge

Backed by years of experience of this domain, we present clients with the premium quality of Aerosense Differential Pressure Gage. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors.

Features:

• Excellent measurement accuracy
• Easy to use
• Requires less maintenance

Specifications:

• Indicating Pressure Reference: Differential Pressure Gauge
• Ambient Temp.Range: -7 ~ 60 °c
• Weight: 1 Lb. 2oz (510g)

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: www.envirotechindustrialproduct.in
• Delivery Time: www.envirotechindustrialproducts.co.in
• Packaging Details: www.envirotechindustrialproduct.in