Rod Type Pre Filter In Bangalore, Haryana

Rod Type Pre Filter In Bangalore, Haryana

Rod Type Pre Filter In Bangalore, Haryana

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type Available in flange or box type
Frame Material Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media HDPE and non-woven synthetic.
Gasket No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators None
Sealant PU based epoxy
Face Guard No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application Athlete Pre filters are most suited for:
Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.
AHU PRE FILTER In Amalapuram Andhra Pradesh

AHU PRE FILTER In Amalapuram Andhra Pradesh

AHU PRE FILTER In Amalapuram Andhra Pradesh


ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU-PRE-FILTER-In-Amalapuram-Andhra-Pradesh
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in

AHU PRE Filter In Lanja Maharashtra

AHU PRE Filter In Lanja Maharashtra

AHU PRE Filter In Lanja Maharashtra

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

Additional Information:

  • Item Code: AHU-Pre-Filter-In-Pulwama-Jammu-and-Kashmir
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in

AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand

AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand

 

AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER IN Kokar Industrial Area Ranchi Jharkhand
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com

 

AHU PRE FILTER In Cuddapah Andhra Pradesh

AHU PRE FILTER In Cuddapah Andhra Pradesh

AHU PRE FILTER In Cuddapah Andhra Pradesh

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

 

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER In Cuddapah Andhra Pradesh
  • www.envirotechdelhi.net
  • www.envirotechindia.info
  • www.envirotechdelhi.info

AHU PRE FILTER In Bazpur Uttarakhand

AHU PRE FILTER In Bazpur Uttarakhand

AHU PRE FILTER In Bazpur Uttarakhand

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER In Bazpur Uttarakhand
  • www.envirotechdelhi.com
  • www.envirotechindia.co.in
  • www.envirotechdelhi.in

 

AHU PRE FILTER In Rasipuram Tamil Nadu

AHU PRE FILTER In Rasipuram Tamil Nadu

AHU PRE FILTER In Rasipuram Tamil Nadu

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER In Rasipuram Tamil Nadu
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com

 

Sensocon USA 211-D040I-3 Differential Pressure Transmitter

Sensocon USA 211-D040I-3 Differential Pressure Transmitter

Sensocon USA 211-D040I-3 Differential Pressure
Transmitter
The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.Specifications 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Sensocon-USA-211-D040I-3-Differential-Pressure-Transmitter
  • www.envirotechindustrialproduct.net
  • www.envirotechindustrialproductsindia.in
  • www.envirotechindustrialproductsdelhi.com
Sensocon USA 211-D500A-1 Differential Pressure Transmitter

Sensocon USA 211-D500A-1 Differential Pressure Transmitter

Sensocon USA SERIES 211-D500A-1 Differential Pressure Transmitter

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

 

Additional Information:

  • Item Code: Sensocon-USA-211-D500A-1
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in
Sensocon USA SERIES 211-D001K-1 Differential Pressure Transmitter 

Sensocon USA SERIES 211-D001K-1 Differential Pressure Transmitter 

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Sensocon-USA-211-D001K-1-Differential-Pressure-Transmitter
  • www.envirotechindia.co.in
  • www.envirotechdelhi.in
  • www.envirotechdelhi.net
Sensocon USA 211-D010K-3 Differential Pressure Transmitter 

Sensocon USA 211-D010K-3 Differential Pressure Transmitter 

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Sensocon-USA-211-D010K-3-Differential-Pressure-Transmitter
  • www.envirotechdelhi.co.in
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
Sensocon USA 211-D002K-3 Differential Pressure Transmitter | ENVIRO TECH | 9871034100

Sensocon USA 211-D002K-3 Differential Pressure Transmitter | ENVIRO TECH | 9871034100

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Sensocon-USA-211-D002K-3-Differential-Pressure-Transmitter
  • www.envirotechindia.info
  • www.envirotechdelhi.info
  • www.envirotechindia.net
Series 211 Differential Pressure Transmitter 

Series 211 Differential Pressure Transmitter 

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Series-211-Differential-Pressure-Transmitter
  • www.envirotechindustrialproducts.com
  • www.envirotechindustrialproducts.net
  • www.envirotechindustrialproduct.net
Sensocon USA 211-D050K-3 Differential Pressure Transmitter 

Sensocon USA 211-D050K-3 Differential Pressure Transmitter 

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: Sensocon-USA-211-D050K-3-Differential-Pressure-Transmitter
  • www.envirotechindustrialproduct.in
  • www.envirotechindustrialproducts.in
  • www.envirotechindustrialproduct.com
SENSOCON USA 211-D500M-2 Dofifferential Pressure Transmitter

SENSOCON USA 211-D500M-2 Dofifferential Pressure Transmitter

 

The Series 211 Differential Pressure Transmitter Can Accurately Measure Positive, Negative, Or Differential Pressure And Send The Corresponding 4 – 20 mA Output Signal. The Series 211 Differential Pressure Transmitter Is Not Position Sensitive And Can Be Mounted In Any Orientation Without Compromising Accuracy. It Also Features A Power LED, So You Always Know When The Transmitter Is Operating. The Compact, Lightweight Design Makes Installation Simple And Easy.

Specifications

 

  • Maximum Pressure:

Ranges ≤ 5 PSI (35kPa) =15 PSI (100kPa) Max
Ranges > 5 PSI (35kPa) =30 PSI (200kPa) Max

  • Media Compatibility:

Air And Compatible Non-Combustible,Non-Corrosive Gases

  • Accuracy:

Ranges ≤ 4″ w.c. (1kPa) 1.0%
Ranges ≥ 5″ w.c. (1.25kPa) 0.25%

  • Temperature Ranges:

Compensated: 15° to 120°F (-10° to 50°C)
Operating: -10° to 155°F (-25° to 70°C)

  • Thermal Effect:

+/- 0.028% FS/°F (+/- 0.050% FS/°C)

  • Stability:

+/- 0.25% FS/Year

  • Output Signal:

4-20 mA, 2-Wire Or 0 – 10 V

  • Loop Resistance:

250 Ω @ 24 VDC

  • Power Supply:

12-30 VDC

  • Housing Material:

ABS Plastic

  • Electrical Connection:

Screw Terminals

  • Process Connection:

Push On Connection For 3/16″ I.D. Tubing

  • Agency Approvals:

CE

Model Number

Model Pressure Range Accuracy
211-D001I-1 0-1″ 1%
211-D002I-1 0-2″ 1%
211-D004I-1 0-4″ 1%
211-D006I-3 0-6″ 0.25%
211-D010I-3 0-10″ 0.25%
211-D020I-3 0-20″ 0.25%
211-D040I-3 0-40″ 0.25%
211-D005P-3 0-5 PSI 0.25%
211-D010P-3 0-10 PSI 0.25%
211-D015P-3 0-15 PSI 0.25%
211-D250A-1 0-250 Pa 1%
211-D500A-1 0-500 Pa 1%
211-D001K-1 0-1 kPa 1%
211-D002K-3 0-2 kPa 0.25%
211-D003K-3 0-3 kPa 0.25%
211-D005K-3 0-5 kPa 0.25%
211-D010K-3 0-10 kPa 0.25%
211-D025K-3 0-25 kPa 0.25%
211-D050K-3 0-50 kPa 0.25%
211-D100K-3 0-100 kPa 0.25%

*For 0-10 V OutPut, Add -V To The End Of The Part Number. Consult Factory For Other Calibration Ranges Including Zero Center Ranges.

Additional Information:

  • Item Code: SENSOCON-USA-211-D500M-2-Differential-Pressure-Transmitter
  • www.envirotechindustrialproduct.in
  • www.envirotechindustrialproducts.in
  • www.envirotechindustrialproduct.com
AHU Pre Filter In Orathanadu Tamil Nadu

AHU Pre Filter In Orathanadu Tamil Nadu

AHU Pre Filter In Orathanadu Tamil Nadu

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

 

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU Pre Filter In Orathanadu Tamil Nadu
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com

 

AHU PRE FILTER In Baramati Maharashtra

AHU PRE FILTER In Baramati Maharashtra

 

AHU PRE FILTER In Baramati Maharashtra

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER In Baramati Maharashtra
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com

 

AHU PRE FILTER In Bommasandra Industrial Area Bangalore

AHU PRE FILTER In Bommasandra Industrial Area Bangalore

 

AHU PRE FILTER  In Bommasandra Industrial Area Bangalore

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER  In Bommasandra Industrial Area Bangalore
  • www.envirotechdelhi.com
  • www.envirotechindia.co.in
  • www.envirotechdelhi.in

 

AHU PRE FILTER IN Getalsud Industrial Area Ranchi Jharkhand

AHU PRE FILTER IN Getalsud Industrial Area Ranchi Jharkhand

 

AHU PRE FILTER IN Getalsud Industrial Area Ranchi Jharkhand

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

 

Fine Filters Are Available in The Range of 1 to 5 Micron:

 

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

 

Applications:

 

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

 

Specifications:

 

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media


All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

 

No Sizes In Inchs Flow ( CFM )
1. 20 x 12 x 6 120
2. 20 x 15 x 6 520
3. 20 x 20 x 6 700
4. 24 x 24 x 6 1000
5. 24 x 24

 

Additional Information:

  • Item Code: AHU PRE FILTER IN Getalsud Industrial Area Ranchi Jharkhand
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com