Rod Type Pre Filter Manufacturers In Delhi INDIA

Rod Type Pre Filter In Varanasi Uttar Pradesh

Rod Type Pre Filter In Jaipur Rajasthan

Rod Type Pre Filter In Jaipur Rajasthan

Rod Type Pre Filter In Chennai Tamil Nadu

Rod Type Pre Filter In Chennai Tamil Nadu

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Faridabad

Rod Type Pre Filter In Faridabad

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Hansi Haryana

Rod Type Pre Filter In Hansi Haryana

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Bhopal Madhya Pradesh

Rod Type Pre Filter In Bhopal Madhya Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Jhunjhunun Rajasthan

Rod Type Pre Filter In Jhunjhunun Rajasthan

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Bhilwara Rajasthan

Rod Type Pre Filter In Bhilwara Rajasthan

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Barabanki Uttar Pradesh

Rod Type Pre Filter In Barabanki Uttar Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Pune Maharashtra

Rod Type Pre Filter In Pune Maharashtra

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Goa

Rod Type Pre Filter In Goa

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Kolkata West Bengal

Rod Type Pre Filter In Kolkata West Bengal

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Kolhapur Maharashtra

October 3, 2022October 3, 2022Envirotech

Rod Type Pre Filter In Kolhapur Maharashtra

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Noida Uttar Pradesh

Rod Type Pre Filter In Noida Uttar Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Mirzapur Uttar Pradesh

Rod Type Pre Filter In Mirzapur Uttar Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Mumbai Maharashtra

Rod Type Pre Filter In Mumbai Maharashtra

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Jammu Jammu and Kashmir

Rod Type Pre Filter In Jammu Jammu and Kashmir

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Ratiya Haryana

Rod Type Pre Filter In Ratiya Haryana

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Anantnag Jammu and Kashmir

Rod Type Pre Filter In Anantnag Jammu and Kashmir

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Indore Madhya Pradesh

Rod Type Pre Filter In Indore Madhya Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Cachar Assam

Rod Type Pre Filter In Cachar Assam

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Dadri Uttar Pradesh

October 3, 2022March 1, 2023Envirotech

Rod Type Pre Filter In Dadri Uttar Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In GIDC Sachin Surat

Rod Type Pre Filter In GIDC Sachin Surat

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Sangli Maharashtra

Rod Type Pre Filter In Sangli Maharashtra

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Ambikapur Chhattisgarh

Rod Type Pre Filter In Ambikapur Chhattisgarh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Bhopal Madhya Pradesh

Rod Type Pre Filter In Bhopal Madhya Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Ghaziabad Uttar Pradesh

Rod Type Pre Filter In Ghaziabad Uttar Pradesh

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Ahmedabad Gujarat

September 22, 2022October 3, 2022Envirotech

Rod Type Pre Filter In Ahmedabad Gujarat

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Bangalore, Haryana

Rod Type Pre Filter In Bangalore, Haryana

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Sangrur Punjab

Rod Type Pre Filter In Sangrur Punjab

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Pune Maharashtra

Rod Type Pre Filter In Pune Maharashtra

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Rod Type Pre Filter In Noida Uttar Pradesh