Dwyer Series 2000:2060 Magnehelic Differential Pressure Gage

Product Details:

Minimum Order Quantity 1 Number
Measuring Range(mm) 0-60 pac
Model No. Series 2000: 2060

Dwyer Instruments – Series 2000: 2060 Magnehelic Differential Pressure Gage

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Service: Air and non-combustible, compatible gases (Natural Gas option available).
Wetted Materials: Call us at (888) 886-8185.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: ±2% of full scale throughout range at 70°F (21.1°C).
Pressure Range: 0-60.0″ w.c.
Pressure Limits: -20″ Hg. to 15 psig. (-0.677 bar to 1.034 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140°F (-6.67 to 60°C).
Mounting Orientation: Diaphragm in vertical position.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g).
Standard Accessories: Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapters and three flush mounting adapters with screws.
Below are other pressure ranges available for Series 2000 Differential Pressure Gage:

of Water
of Water
2000-00N†•• -.05-0-.2 2015 0-15
2000-00†•• 0-.25 2020 0-20
2000-0†• 0-.50 2025 0-25
2001 0-1.0 2030 0-30
2002 0-2.0 2040 0-40
2003 0-3.0 2050 0-50
2004 0-4.0 2060 0-60
2005 0-5.0 2080 0-80
2006 0-6.0 2100 0-100
2008 0-8.0 2150 0-150
2010 0-10
† These ranges calibrated for vertical scale position.
• Accuracy +/-3% •• Accuracy +/-4%

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: www.envirotechindustrialproducts.co.in
  • Delivery Time: www.envirotechindustrialproduct.co.in
  • Packaging Details: www.envirotechindustrialproduct.in

Leave a Reply

Your email address will not be published. Required fields are marked *